Signal LCS770 Instrukcje Operacyjne Strona 1

PLITSTR330 REV. D 9/10/08 A Division of Star Headlight & Lantern Co., Inc. LCS770 SIREN AMPLIFIER INS

-8- SIRENAMPLIFIER12 - Brown (#14 AWG)9 - Orange (#18 AWG)8 - Gray (#18 AWG)7 - Brown (#14 AWG)6 - Blue (#18 AWG)5 - Black (#14 AWG)4 - Red (#14

-9- Light Wiring Connections: Red: (8 AWG) +12VDC Power - The two large red wires exiting the back of the siren should be connected to +12VDC t

-10- AMPLIFIER+BATTERY20A20A20A20A20A20ARed (#8 AWG)Red (#8 AWG)Lights to be activated whenSlide Switch is in Position 3PIN 8 - GRAY (#12-16 AWG) -

-11- OPERATION GENERAL This unit is designed for easy operation under the stress associated with high-speed pur

-12- LIGHT PUSH BUTTON SWITCHES Four push button switches are provided to enable four separate functions. The far left push button (possibly L. All

-13- MANUAL and HORN BUTTONS The front panel of the LCS770 contains two pushbuttons that operate the Manual function and the Air Horn. Manual – W

-14- VOLUME CONTROLS The radio repeat volume (Radio) control is recessed in the upper left hand corner of the front face. This should be set when t

-15- SERVICE FUSES There are several fuses in this unit that protect it from shorts, spikes, and other such electrical problems that may possibly

-16- TROUBLESHOOTING This unit is designed to provide years of reliable service under even the worst conditions. Many times there may appear to be

-17- PARTS The following parts are available from Signal Vehicle Products: Part Description S30235-13 Siren Top Cover S30234-13 Siren Bottom M

This page intentionally left blank

-18- LIMITED WARRANTY Signal Vehicle Products warrants this new product to be free from defects in mate

-1- TABLE OF CONTENTS GENERAL DESCRIPTION 2 INSTALLATION 2-10 INSTALLER-SELECTABLE OPTIONS 3-4 MOUNTING 5 ELECTRICAL C

-2- GENERAL DESCRIPTION The LCS770 Siren Amplifier is a premium 200W unit designed for single or dual 100W speaker use and full lighting control.

-3- Installer Selectable Options (Jumper Settings) The LCS770 has several options that can be selected during installation. Jumpers on the printed c

-4- Installer Selectable Options (continued) Park Kill Input Polarity - The park kill (cutout) input turns off any siren tone output when activated

-5- MOUNTING SAFETY PRECAUTIONS For the safety of the installer, vehicle operator, passengers and the community please observe the following safet

-6- Please follow these guidelines when wiring the siren: • Use only high quality crimp connectors. • Make sure all connections are tight. • Rou

-7- Siren Wiring Connections (CONTD): Optional Connections: BLUE: (Pins 3 & 6) Input From Radio - Used for radio repeat. Connect one blue