Signal NVR 2708 Instrukcja Użytkownika Pobierz pdf (Strona 4)

3.1.2. CERTIFICATION:

The Cameras Offered by the Tenderer shall be UL Approved and conform to

ONVIF Standards (Open Network Video Interface Forum) and for the product safety the

camera shall comply with CE Regulations UL, CSA, EN, and IEC Standards.

3.1.3 CAMERA MOUNTING STRUCTURES:

All the Cameras shall be supplied along with aesthetically designed G.I.Mounting

structures as detailed below :-

1) shall have a total height of 2500 mm.

2) shall have suitable bottom plate welded to the GI pipe for grouting on the

ground.

3) The GI pipe and other brackets welded to it shall anodized to with stand the

hostile environmental conditions.

4) The top of the pipe shall be closed with plate to prevent dust/water getting into

the pipe.

5) The scope of work will also include installation of the mounting structures for all

the cameras at the locations pointed out by Trust including construction of concrete

pedestal for grouting/fixing the GI Structure.

3.1.4 8 PORT AND 16 PORT 10/100/1000 SWITCHER

QUANTITY REQUIRED:

a) 8 PORT SWITCHER: 6 Numbers

b) 16 PORT SWITCHER:4 Numbers

Tenderer shall supply, Install and Commission necessary 8 and 16 port switchers

complete with all accessories for viewing the video signals individually at Centralized

Video Surveillance system control room (CVSS) as per technical specification given

below

MAKE: D-LINK / DAX /CISCO only.

STANDARDS IEEE 802.3,802.3u,802.3x and 802.3ab

PORTS 8 Port(min) and 16 Port (min) RJ45 10/100/1000 +2 mini-GBIC

Ports

CABLING TYPE Category 5 Ethernet or Better

LED System 1 through 24

1 2 3 4 5 6 7 8 9 ... 17 18

Brak uwag

Signal NVR 2708 Instrukcja Użytkownika Strona 4