Signal NVR2716 Instrukcja Użytkownika Pobierz pdf (Strona 27)

- 27 -

3.3.2 Network setup

Pic 3.3.2 Network setup

【Net Card】You can choose cable network card or wireless network card.

【DHCP Enable】Obtain IP address automatically(not suggested)

Note：

：：

：DHCP server is pre-installed.

【IP address】Set the IP address. Default: 192.168.1.10.

【Subnet mask】Set the subnet mask code. Default: 255.255.255.0.

【Gateway】Set the default gateway. Default: 192.168.1.1.

【DNS setup】Domain Name Server. It translates the domain name into IP address. The IP address

is offered by network provider. The address must be set and reboot then it works.

【Media port】Default: 34567.

【HTTP port】Default: 80.

【HS Download】

【Transfer Policy】There are three strategies: self-adaption, image quality precedence and fluency

precedence. The code stream will adjust according to the setup. Self-adaption is the tradeoff

between the image quality precedence and fluency precedence. Fluency precedence and

self-adaption are valid only when the assistant code stream is turned on. Otherwise image quality

precedence is valid.

3.3.3 NetService

Choose the network service option and click the set button to configure the advanced network

functions or double click the service button to configure the parameters

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 50 51

Brak uwag

Signal NVR2716 Instrukcja Użytkownika Strona 27